Bitcoin Mining Labby Coinovo

Mining Lab · Guides · Bitaxe setup: step by step to your first share

Bitaxe guide

Bitaxe setup: step by step to your first share

The Bitaxe is an open-source Bitcoin miner the size of a pocket. It uses as much power as a small lamp, is almost silent and computes 0.5 to more than 4 TH/s depending on the model. This guide gets it onto your Wi-Fi, connects it to a solo pool and shows which settings are worth changing.

What you need

  1. The Bitaxe with fan and heatsink. Gamma, Supra and Ultra all run the same software, AxeOS.
  2. A suitable power supply with 5 volts and enough headroom, usually at least 4 amps. Weak phone chargers cause crashes.
  3. A 2.4 GHz Wi-Fi network. The Bitaxe does not support 5 GHz.
  4. Your own Bitcoin address for the reward. Ideally from a wallet whose recovery words only you know.

Step 1: Get it onto Wi-Fi

  1. Plug in the Bitaxe. On first start it opens its own Wi-Fi hotspot whose name starts with “Bitaxe_”.
  2. Join this hotspot with your phone or laptop. The setup page usually opens by itself; otherwise go to 192.168.4.1 in the browser.
  3. Enter the name and password of your 2.4 GHz Wi-Fi. You can add the pool details now or later.
  4. Save and restart. The small display then shows its new IP address on your home network. That is where you reach AxeOS in the browser.

Step 2: Connect to the solo pool

In AxeOS, enter the pool details under Settings. For the Coinovo solo pool they are:

Coinovo solo pool connection details
Stratum Hostpool.coinovo.app
Stratum Port3333
Stratum Useryour-bitcoin-address.bitaxe
Stratum Passwordx
Go to the Coinovo solo poolLive dashboard, chance calculator and node monitor. 0% fee, no sign-up.

The part after the dot in the Stratum user is just a device name. Payouts always go to the address before it. If you have a Coinovo account, use the device name from the app; it starts with “cnvo”. Then the shift bonus and the league count.

After the restart, AxeOS shows the first accepted shares. Your device appears on the dashboard of the solo pool page after a minute or two.

Step 3: Frequency and voltage

AxeOS lets you set the chip's frequency and core voltage. Higher values give more hashrate, but also more heat and power draw. For most devices the factory setting is the best choice.

If you want more, raise the values in small steps and watch the temperature. In continuous use the chip should stay well below 70 °C, ideally around 60 °C. If rejected shares go up or the device restarts, the step was too big.

Overclocking pays off less in solo mining than you might think: 20 percent more hashrate means 20 percent more chance, for example 1 in 5 instead of 1 in 6 million per day.

Common mistakes

  1. No Wi-Fi found: the router only broadcasts on 5 GHz, or the Wi-Fi name or password contains special characters. A separate 2.4 GHz network helps.
  2. No shares: the host was entered with “stratum+tcp://” in front, or the port is wrong. In AxeOS only pool.coinovo.app goes into the host field, and 3333 into its own port field.
  3. Constant restarts: power supply too weak or frequency too high.
  4. Hashrate swings a lot: that is normal. It is measured from shares, which arrive at random. The one-hour average is what counts.

Useful tools

The Coinovo appA reason to come back every dayTasks, shifts and the daily hunt, plus an account that shows what has added up.Daily tasksYour own accountCosts nothingStart now

Frequently asked questions

How much power does a Bitaxe use?

About 12 to 20 watts depending on the model, more for the stronger versions. A Bitaxe Gamma running non-stop uses around 150 kWh a year, about 45 euros at 30 cents per kWh.

Does a Bitaxe pay off financially?

Not in a pool: it brings around 50 satoshis a day, less than the power costs. Solo it is a ticket with a small chance at a whole block. Treat it as a hobby and a learning project.

Which Bitcoin address do I enter?

An address from your own wallet, not from an exchange. If you find a block, more than 3 BTC arrive, and they should belong directly to you.

Do I need an account with the pool?

No. The Coinovo solo pool works with your Bitcoin address alone. You only need a Coinovo account for the extra rewards in the app.

Can I run several Bitaxes on the same address?

Yes. Give each device its own name after the dot, then you see them separately on the dashboard.

Sources

More guides

Solo mining or pool: which suits you?Mining guideNerdMiner setup: the smallest Bitcoin minerNerdMiner guideBitcoin mining at home: what it costs and when it pays offMining guideMining pools comparedShares, fees, payouts