Bitcoin Mining Labby Coinovo

Mining Lab · Guides · NerdMiner setup: the smallest Bitcoin miner

NerdMiner guide

NerdMiner setup: the smallest Bitcoin miner

A NerdMiner is a small board with a display that makes Bitcoin mining visible for a few euros. It uses about one watt and computes a good 50 to 80 kH/s. It will practically never find a block, but it shows live how mining works. This guide gets it into a solo pool in ten minutes.

What you need

  1. A supported board, most often a LilyGO T-Display S3 with an ESP32-S3.
  2. A USB cable that carries data, not just power.
  3. Chrome or Edge on a computer for the web flasher.
  4. A 2.4 GHz Wi-Fi network and your own Bitcoin address.

Step 1: Flash the firmware

  1. Open the official web flasher of the NerdMiner project. It is linked from the project page on GitHub.
  2. Choose your board, connect it via USB and click flash. The browser asks which port it may access.
  3. After about a minute the board restarts and shows the NerdMiner logo.

Step 2: Enter Wi-Fi and pool

  1. The NerdMiner opens a hotspot called “NerdMinerAP”. The factory password is “MineYourCoins”.
  2. Connect with your phone. The setup page opens; otherwise go to 192.168.4.1 in the browser.
  3. Choose your 2.4 GHz Wi-Fi and enter its password.
  4. Enter the pool details and save:
Coinovo solo pool connection details
Pool URLpool.coinovo.app
Pool Port3333
Your BTC addressyour-bitcoin-address
Go to the Coinovo solo poolLive dashboard, chance calculator and node monitor. 0% fee, no sign-up.

After the restart the display shows hashrate, valid shares and your best hit. It appears on the dashboard of the solo pool page after a minute or two.

To change the settings later, hold the button on the board for about five seconds. The hotspot then opens again.

What the NerdMiner can and cannot do

At around 78 kH/s, the chance of a block is about 1 in 93 trillion per day. On average a find would take far longer than the universe has existed. That is not a flaw in the software but the honest order of magnitude: a modern ASIC computes billions of times faster.

What it is good for: it runs on about three euros of power a year, shows every share and your best hit, and explains what difficulty means better than any video. If you want more of a chance, get a Bitaxe. It is about 15 million times faster.

Useful tools

The Coinovo appA reason to come back every dayTasks, shifts and the daily hunt, plus an account that shows what has added up.Daily tasksYour own accountCosts nothingStart now

Frequently asked questions

Can a NerdMiner find a Bitcoin block?

In theory yes, in practice no. The chance is about 1 in 93 trillion per day. It is a learning and fun device.

How much power does a NerdMiner use?

About one watt, roughly 9 kWh a year. At 30 cents per kWh that is just under 3 euros.

Why does my NerdMiner not find the Wi-Fi?

Usually the router only broadcasts on 5 GHz, or the password was entered wrongly. Hold the button for five seconds and repeat the setup.

What does the best hit on the display mean?

It is the highest difficulty any share from your device has ever reached. A real block currently needs more than 100 trillion.

NerdMiner or Bitaxe?

A NerdMiner is enough to get to know mining. If you want a real, if small, chance at a block, get a Bitaxe.

Sources

More guides

Solo mining or pool: which suits you?Mining guideBitaxe setup: step by step to your first shareBitaxe guideBitcoin mining at home: what it costs and when it pays offMining guideMining pools comparedShares, fees, payouts